INIT: INIT: Sending prUsing makefile-style concurrent boot in runlevel 6. Stopping MD monitoring service: mdadm --monitor. Stopping internet superserver: inetd. [ 270.072140] md: md0 stopped. [ 270.084093] md: unbind [ 270.087009] md: export_rdev(sda3) [ 270.102103] md: unbind [ 270.105515] md: export_rdev(sdd1) [ 270.108894] md: unbind [ 270.111801] md: export_rdev(sdc1) [ 270.121864] md: unbind [ 270.139957] md: export_rdev(sdb1) Stopping MD array md0...done (stopped). Stopping Postfix Mail Transport Agent: postfix. Asking all remaining processes to terminate...done. All processes ended within 1 seconds....done. Preparing for shutdown. Stopping enhanced syslogd: rsyslogd. Stopping NFS common utilities: statd. Stopping portmap daemon.... Saving the system clock. Deconfiguring network interfaces...Internet Systems Consortium DHCP Client 4.1.1-P1 Copyright 2004-2010 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:08:9b:c4:cb:64 Sending on LPF/eth0/00:08:9b:c4:cb:64 Sending on Socket/fallback DHCPRELEASE on eth0 to 192.168.1.1 port 67 done. Cleaning up ifupdown.... Deactivating swap...done. Will now restart. [ 273.791691] md: stopping all md devices. [ 274.795872] sd 3:0:0:0: [sdd] Synchronizing SCSI cache [ 274.814076] sd 2:0:0:0: [sdc] Synchronizing SCSI cache [ 274.834072] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 274.854068] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 274.874379] Restarting system. __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** ** MARVELL BOARD: DB-88F6281A-BP LE U-Boot 1.1.4 (May 5 2009 - 18:59:48) Marvell version: 3.4.4 U-Boot code: 00600000 -> 0067FFF0 BSS: -> 00690DCC Soc: MV88F6281 Rev 3 (DDR2) CPU running @ 800Mhz L2 running @ 400Mhz SysClock = 400Mhz , TClock = 200Mhz DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6 DRAM CS[0] base 0x00000000 size 256MB DRAM Total size 256MB 16bit width [16384kB@f8000000] Flash: 16 MB Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done CPU : Marvell Feroceon (Rev 1) Streaming disabled Write allocate disabled USB 0: host mode PCI 0: PCI Express Root Complex Interface PEX interface detected Link X1 Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 3  2  1  0 ## Booting image at 00800000 ... Image Name: Debian kernel Created: 2010-10-18 17:49:56 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1431492 Bytes = 1.4 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-kirkwood (Debian 2.6.32-25) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 Fri Oct 15 13:52:51 UTC 2010 [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: QNAP TS-41x [ 0.000000] Ignoring unrecognised tag 0x41000403 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/ram initrd=0xa00000,0x900000 ramdisk=32768 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 256MB = 256MB total [ 0.000000] Memory: 246144KB available (3512K code, 583K data, 124K init, 0K highmem) [ 0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:114 [ 0.000000] Console: colour dummy device 80x30 [ 21.474981] Calibrating delay loop... 799.53 BogoMIPS (lpj=3997696) [ 21.704935] Security Framework initialized [ 21.704959] SELinux: Disabled at boot. [ 21.704992] Mount-cache hash table entries: 512 [ 21.705347] Initializing cgroup subsys ns [ 21.705366] Initializing cgroup subsys cpuacct [ 21.705379] Initializing cgroup subsys devices [ 21.705391] Initializing cgroup subsys freezer [ 21.705402] Initializing cgroup subsys net_cls [ 21.705474] CPU: Testing write buffer coherency: ok [ 21.706343] devtmpfs: initialized [ 21.708610] regulator: core version 0.5 [ 21.708881] NET: Registered protocol family 16 [ 21.709503] Kirkwood: MV88F6281-A1, TCLK=200000000. [ 21.709519] Feroceon L2: Enabling L2 [ 21.709560] Feroceon L2: Cache support initialised. [ 21.710907] Kirkwood PCIe port 0: [ 21.710917] link up [ 21.710926] PCI: bus0 uses PCIe port 0 [ 21.711316] PCI: bus0: Fast back to back transfers disabled [ 21.713018] bio: create slab at 0 [ 21.713365] vgaarb: loaded [ 21.713963] Switching to clocksource orion_clocksource [ 21.718867] NET: Registered protocol family 2 [ 21.719198] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 21.720290] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 21.720495] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 21.720623] TCP: Hash tables configured (established 8192 bind 8192) [ 21.720637] TCP reno registered [ 21.720845] NET: Registered protocol family 1 [ 21.721087] Unpacking initramfs... [ 22.438838] Freeing initrd memory: 9216K [ 22.438962] NetWinder Floating Point Emulator V0.97 (double precision) [ 22.439295] audit: initializing netlink socket (disabled) [ 22.439338] type=2000 audit(0.950:1): initialized [ 22.448647] VFS: Disk quotas dquot_6.5.2 [ 22.448989] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 22.449135] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 22.449950] msgmni has been set to 499 [ 22.452062] alg: No test for stdrng (krng) [ 22.452218] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 22.452236] io scheduler noop registered [ 22.452247] io scheduler anticipatory registered [ 22.452258] io scheduler deadline registered [ 22.452508] io scheduler cfq registered (default) [ 22.460650] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 22.461268] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A [ 22.801056] console [ttyS0] enabled [ 22.804904] serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A [ 22.812921] m25p80 spi0.0: m25p128 (16384 Kbytes) [ 22.817695] Creating 6 MTD partitions on "spi_flash": [ 22.822778] 0x000000000000-0x000000080000 : "U-Boot" [ 22.828587] 0x000000200000-0x000000400000 : "Kernel" [ 22.834271] 0x000000400000-0x000000d00000 : "RootFS1" [ 22.839960] 0x000000d00000-0x000001000000 : "RootFS2" [ 22.845665] 0x000000080000-0x0000000c0000 : "U-Boot Config" [ 22.851847] 0x0000000c0000-0x000000200000 : "NAS Config" [ 22.858128] mice: PS/2 mouse device common for all mice [ 23.864013] rtc-mv rtc-mv: internal RTC not ticking [ 23.869044] i2c /dev entries driver [ 23.874762] rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc0 [ 23.881793] cpuidle: using governor ladder [ 23.886109] cpuidle: using governor menu [ 23.890135] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver [ 23.896564] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver [ 23.934044] mv_xor mv_xor.0: Marvell XOR: ( xor cpy ) [ 23.974043] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy ) [ 24.014041] mv_xor mv_xor.2: Marvell XOR: ( xor cpy ) [ 24.054042] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy ) [ 24.061231] TCP cubic registered [ 24.064500] NET: Registered protocol family 17 [ 24.069409] registered taskstats version 1 [ 24.075049] rtc-s35390a 0-0030: setting system clock to 2010-10-18 18:33:54 UTC (1287426834) [ 24.083538] Initalizing network drop monitor service [ 24.088622] Freeing init memory: 124K Loading, please wait... [ 24.194381] udev: starting version 160 [ 24.620766] SCSI subsystem initialized [ 24.829996] MV-643xx 10/100/1000 ethernet driver version 1.4 [ 24.836040] mv643xx_eth smi: probed [ 24.907904] net eth0: port 0 with MAC address 00:08:9b:c4:cb:64 [ 24.939313] usbcore: registered new interface driver usbfs [ 24.945889] usbcore: registered new interface driver hub [ 24.958915] usbcore: registered new device driver usb [ 24.966461] net eth1: port 0 with MAC address 00:08:9b:c4:cb:65 [ 24.994373] sata_mv 0000:00:01.0: version 1.28 [ 24.999112] sata_mv 0000:00:01.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx [ 25.012411] scsi0 : sata_mv [ 25.020444] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 25.030351] scsi1 : sata_mv [ 25.035073] scsi2 : sata_mv [ 25.038695] orion-ehci orion-ehci.0: Marvell Orion EHCI [ 25.045144] scsi3 : sata_mv [ 25.049684] ata1: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0022000 irq 9 [ 25.057342] ata2: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0024000 irq 9 [ 25.064972] ata3: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0026000 irq 9 [ 25.072580] ata4: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0028000 irq 9 [ 25.080959] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1 [ 25.114040] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 25.134032] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 25.140046] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 25.146896] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 25.154167] usb usb1: Product: Marvell Orion EHCI [ 25.158897] usb usb1: Manufacturer: Linux 2.6.32-5-kirkwood ehci_hcd [ 25.165292] usb usb1: SerialNumber: orion-ehci.0 [ 25.170624] usb usb1: configuration #1 chosen from 1 choice [ 25.176640] hub 1-0:1.0: USB hub found [ 25.180466] hub 1-0:1.0: 1 port detected [ 25.185368] sata_mv sata_mv.0: version 1.28 [ 25.189695] sata_mv sata_mv.0: slots 32 ports 2 [ 25.196969] scsi4 : sata_mv [ 25.200445] scsi5 : sata_mv [ 25.203812] ata5: SATA max UDMA/133 irq 21 [ 25.207964] ata6: SATA max UDMA/133 irq 21 [ 25.504019] usb 1-1: new high speed USB device using orion-ehci and address 2 [ 25.554016] ata5: SATA link down (SStatus 0 SControl F300) [ 25.594042] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 25.634070] ata1.00: ATA-8: ST32000542AS, CC34, max UDMA/133 [ 25.639765] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 25.655439] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608 [ 25.662183] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 25.669379] usb 1-1: Product: USB2.0 Hub [ 25.674438] usb 1-1: configuration #1 chosen from 1 choice [ 25.680543] hub 1-1:1.0: USB hub found [ 25.684491] ata1.00: configured for UDMA/133 [ 25.689146] scsi 0:0:0:0: Direct-Access ATA ST32000542AS CC34 PQ: 0 ANSI: 5 [ 25.698393] hub 1-1:1.0: 4 ports detected [ 26.214045] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 26.254069] ata2.00: ATA-8: ST32000542AS, CC34, max UDMA/133 [ 26.259775] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 26.304141] ata2.00: configured for UDMA/133 [ 26.308786] scsi 1:0:0:0: Direct-Access ATA ST32000542AS CC34 PQ: 0 ANSI: 5 [ 26.354461] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 26.362843] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 26.372645] sd 0:0:0:0: [sda] Write Protect is off [ 26.377740] sd 1:0:0:0: [sdb] Write Protect is off [ 26.382734] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 26.392064] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 26.402565] sda: [ 26.404487] sdb: sda1 sda2 sda3 [ 26.430808] sd 0:0:0:0: [sda] Attached SCSI disk [ 26.450133] sdb1 [ 26.454510] sd 1:0:0:0: [sdb] Attached SCSI disk [ 26.834043] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 26.874070] ata3.00: ATA-8: ST32000542AS, CC34, max UDMA/133 [ 26.879776] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 26.944146] ata3.00: configured for UDMA/133 [ 26.948776] scsi 2:0:0:0: Direct-Access ATA ST32000542AS CC34 PQ: 0 ANSI: 5 [ 26.959444] sd 2:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 26.974361] sd 2:0:0:0: [sdc] Write Protect is off [ 26.984531] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 26.995195] sdc: sdc1 [ 27.033852] sd 2:0:0:0: [sdc] Attached SCSI disk [ 32.514013] ata4: link is slow to respond, please be patient (ready=0) [ 36.174042] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 36.214072] ata4.00: ATA-8: ST32000542AS, CC34, max UDMA/133 [ 36.219767] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 36.284146] ata4.00: configured for UDMA/133 [ 36.288805] scsi 3:0:0:0: Direct-Access ATA ST32000542AS CC34 PQ: 0 ANSI: 5 [ 36.300487] sd 3:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 36.318633] sd 3:0:0:0: [sdd] Write Protect is off [ 36.323583] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 36.334276] sdd: sdd1 [ 36.359150] sd 3:0:0:0: [sdd] Attached SCSI disk [ 36.644028] ata6: SATA link down (SStatus 0 SControl F300) Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Begin: Loading[ 37.238053] async_tx: api initialized (async) [ 37.248172] xor: measuring software checksum speed [ 37.294004] arm4regs : 727.200 MB/sec [ 37.343998] 8regs : 538.800 MB/sec [ 37.393998] 32regs : 598.400 MB/sec [ 37.398203] xor: using function: arm4regs (727.200 MB/sec) [ 37.584225] raid6: int32x1 57 MB/s [ 37.754445] raid6: int32x2 75 MB/s [ 37.924312] raid6: int32x4 85 MB/s [ 38.094255] raid6: int32x8 75 MB/s [ 38.098025] raid6: using algorithm int32x4 (85 MB/s) [ 38.175401] md: raid6 personality registered for level 6 [ 38.180743] md: raid5 personality registered for level 5 [ 38.186113] md: raid4 personality registered for level 4 Success: loaded module raid456. done. Begin: Assembling all MD arrays ... Failure: failed to assemble all arrays. done. [ 38.312286] device-mapper: uevent: version 1.0.3 [ 38.319728] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com done. Begin: Running /scripts/local-premount ... done. [ 38.369849] kjournald starting. Commit interval 5 seconds [ 38.375474] EXT3-fs: mounted filesystem with ordered data mode. Begin: Running /scripts/local-bottom ... done. done. Begin: Running /scripts/init-bottom ... done. INIT: version 2.88 booting Using makefile-style concurrent boot in runlevel S. Starting the hotplug events dispatcher: udevd[ 39.518929] udev: starting version 160 . Synthesizing the initial hotplug events...done. [ 40.027714] input: gpio-keys as /devices/platform/gpio-keys/input/input0 Waiting for /dev to be fully populated...done. [ 40.920194] md: md0 stopped. [ 40.954075] md: bind [ 40.979288] md: bind [ 41.004122] md: bind [ 41.037156] md: bind Generating udev events for MD arrays...done. Activating swap...[ 41.294671] Adding 1004052k swap on /dev/sda2. Priority:-1 extents:1 across:1004052k done. Checking root file system...fsck from util-linux-ng 2.17.2 e2fsck 1.41.12 (17-May-2010) /dev/sda1: clean, 26154/625856 files, 257059/2502115 blocks (check after next mount) done. [ 41.479566] EXT3 FS on sda1, internal journal Cleaning up ifupdown.... [ 42.002199] loop: module loaded Loading kernel modules...done. Setting up networking.... Activating lvm and md swap...done. Checking file systems...fsck from util-linux-ng 2.17.2 done. Mounting local filesystems...done. Activating swapfile swap...done. Cleaning up temporary files.... Setting kernel variables ...done. Configuring network interfaces...Internet Systems Consortium DHCP Client 4.1.1-P1 Copyright 2004-2010 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Listening on LPF/eth0/00:08:9b:c4:cb:64 Sending on LPF/eth0/00:08:9b:c4:cb:64 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 [ 46.723862] eth0: link up, 1000 Mb/s, full duplex, flow control disabled DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPOFFER from 192.168.1.1 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPACK from 192.168.1.1 bound to 192.168.1.164 -- renewal in 19814 seconds. [ 48.262655] NET: Registered protocol family 10 [ 48.275226] lo: Disabled Privacy Extensions done. Starting portmap daemon.... Starting NFS common utilities: statd. Cleaning up temporary files.... Setting console screen modes and fonts. cannot (un)set powersave mode Running scripts in rcS.d/ took 1INIT: Entering runlevel: 2 Using makefile-style concurrent boot in runlevel 2. Starting portmap daemon...Already running.. Starting NFS common utilities: statd. Starting enhanced syslogd: rsyslogd. Not starting internet superserver: no services enabled. Starting MD monitoring service: mdadm --monitor. Starting periodic command scheduler: cron. Starting Postfix Mail Transport Agent: postfixStarting OpenBSD Secure Shell server: sshd. . System boot completed. Running scripts in rc2.d/ took 5 seconds. Debian GNU/Linux squeeze/sid adolf ttyS0 adolf login: [ 217.142909] md: md0 stopped. [ 217.146431] md: unbind [ 217.149396] md: export_rdev(sda3) [ 217.153259] md: unbind [ 217.157034] md: export_rdev(sdd1) [ 217.160409] md: unbind [ 217.163314] md: export_rdev(sdc1) [ 217.167572] md: unbind [ 217.170485] md: export_rdev(sdb1) [ 292.358680] md: bind [ 292.375355] md: bind [ 292.384538] md: bind [ 292.388806] md: bind [ 292.416320] raid5: device sdc1 operational as raid disk 2 [ 292.421756] raid5: device sdb1 operational as raid disk 1 [ 292.427223] raid5: device sda3 operational as raid disk 0 [ 292.436505] raid5: allocated 4228kB for md0 [ 292.440814] 2: w=1 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 [ 292.445850] 1: w=2 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 [ 292.450849] 0: w=3 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0 [ 292.455859] raid5: raid level 5 set md0 active with 3 out of 4 devices, algorithm 2 [ 292.463555] RAID5 conf printout: [ 292.466815] --- rd:4 wd:3 [ 292.469534] disk 0, o:1, dev:sda3 [ 292.472951] disk 1, o:1, dev:sdb1 [ 292.476383] disk 2, o:1, dev:sdc1 [ 292.482354] md0: detected capacity change from 0 to 5967354789888 [ 292.499333] md0: AHDI p1 p2 [ 433.507599] ata4: Unable to stop eDMA [ 433.631827] ata3: Unable to stop eDMA [ 433.749043] ata2: Unable to stop eDMA [ 463.484063] ata4.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0xe frozen [ 463.491867] ata4: SError: { RecovData RecovComm UnrecovData Persist Proto HostInt PHYRdyChg PHYInt CommWake 10B8B Dispar BadCRC Handshk LinkSeq TrStaTrns UnrecFIS DevExch } [ 463.507360] ata4.00: failed command: FLUSH CACHE EXT [ 463.512371] ata4.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 463.512380] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error) [ 463.526640] ata4.00: status: { DRDY } [ 463.530340] ata4: hard resetting link [ 464.484052] ata2.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0xe frozen [ 464.491849] ata2: SError: { RecovData RecovComm UnrecovData Persist Proto HostInt PHYRdyChg PHYInt CommWake 10B8B Dispar BadCRC Handshk LinkSeq TrStaTrns UnrecFIS DevExch } [ 464.507347] ata2.00: failed command: FLUSH CACHE EXT [ 464.512362] ata2.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 464.512371] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error) [ 464.526632] ata2.00: status: { DRDY } [ 464.530327] ata2: hard resetting link [ 464.748104] ata1: Unable to stop eDMA [ 464.751829] ata1.00: exception Emask 0x52 SAct 0x3f SErr 0xffffffff action 0xe frozen [ 464.759726] ata1: SError: { RecovData RecovComm UnrecovData Persist Proto HostInt PHYRdyChg PHYInt CommWake 10B8B Dispar BadCRC Handshk LinkSeq TrStaTrns UnrecFIS DevExch } [ 464.775216] ata1.00: failed command: WRITE FPDMA QUEUED [ 464.780493] ata1.00: cmd 61/08:00:96:88:31/00:00:01:00:00/40 tag 0 ncq 4096 out [ 464.780503] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error) [ 464.795896] ata1.00: status: { DRDY } [ 464.799582] ata1.00: failed command: WRITE FPDMA QUEUED [ 464.804869] ata1.00: cmd 61/68:08:9e:88:31/02:00:01:00:00/40 tag 1 ncq 315392 out [ 464.804880] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error) [ 464.820449] ata1.00: status: { DRDY } [ 464.824149] ata1.00: failed command: READ FPDMA QUEUED [ 464.829333] ata1.00: cmd 60/40:10:5e:78:31/00:00:01:00:00/40 tag 2 ncq 32768 in [ 464.829343] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error) [ 464.844735] ata1.00: status: { DRDY } [ 464.848422] ata1.00: failed command: WRITE FPDMA QUEUED [ 464.853696] ata1.00: cmd 61/08:18:57:00:d0/00:00:00:00:00/40 tag 3 ncq 4096 out [ 464.853707] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error) [ 464.869100] ata1.00: status: { DRDY } [ 464.872785] ata1.00: failed command: WRITE FPDMA QUEUED [ 464.878073] ata1.00: cmd 61/00:20:06:8b:31/04:00:01:00:00/40 tag 4 ncq 524288 out [ 464.878084] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error) [ 464.893653] ata1.00: status: { DRDY } [ 464.897353] ata1.00: failed command: WRITE FPDMA QUEUED [ 464.902625] ata1.00: cmd 61/98:28:06:8f:31/02:00:01:00:00/40 tag 5 ncq 339968 out [ 464.902636] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error) [ 464.918202] ata1.00: status: { DRDY } [ 464.921897] ata1: hard resetting link [ 465.032940] ata3.00: exception Emask 0x52 SAct 0x0 SErr 0xffffffff action 0xe frozen [ 465.040755] ata3: SError: { RecovData RecovComm UnrecovData Persist Proto HostInt PHYRdyChg PHYInt CommWake 10B8B Dispar BadCRC Handshk LinkSeq TrStaTrns UnrecFIS DevExch } [ 465.056244] ata3.00: failed command: FLUSH CACHE EXT [ 465.061259] ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [ 465.061267] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x56 (ATA bus error) [ 465.075529] ata3.00: status: { DRDY } [ 465.079224] ata3: hard resetting link [ 465.394014] ata4: failed to resume link (SControl FFFFFFFF) [ 466.234016] ata1: failed to resume link (SControl FFFFFFFF) [ 466.239635] ata2: failed to resume link (SControl FFFFFFFF) [ 466.254005] ata3: failed to resume link (SControl FFFFFFFF) [ 466.464010] ata4: failed to resume link (SControl FFFFFFFF) [ 467.304010] ata1: failed to resume link (SControl FFFFFFFF) [ 467.314002] ata2: failed to resume link (SControl FFFFFFFF) [ 467.324004] ata3: failed to resume link (SControl FFFFFFFF) [ 467.534011] ata4: failed to resume link (SControl FFFFFFFF) [ 468.374009] ata1: failed to resume link (SControl FFFFFFFF) [ 468.384002] ata2: failed to resume link (SControl FFFFFFFF) [ 468.394014] ata3: failed to resume link (SControl FFFFFFFF) [ 468.604008] ata4: failed to resume link (SControl FFFFFFFF) [ 469.444008] ata1: failed to resume link (SControl FFFFFFFF) [ 469.454002] ata2: failed to resume link (SControl FFFFFFFF) [ 469.464004] ata3: failed to resume link (SControl FFFFFFFF) [ 469.674011] ata4: failed to resume link (SControl FFFFFFFF) [ 470.514007] ata1: failed to resume link (SControl FFFFFFFF) [ 470.524002] ata2: failed to resume link (SControl FFFFFFFF) [ 470.534005] ata3: failed to resume link (SControl FFFFFFFF) [ 470.744010] ata4: failed to resume link (SControl FFFFFFFF) [ 471.584009] ata1: failed to resume link (SControl FFFFFFFF) [ 471.594003] ata2: failed to resume link (SControl FFFFFFFF) [ 471.604005] ata3: failed to resume link (SControl FFFFFFFF) [ 471.814010] ata4: failed to resume link (SControl FFFFFFFF) [ 472.654013] ata1: failed to resume link (SControl FFFFFFFF) [ 472.664004] ata2: failed to resume link (SControl FFFFFFFF) [ 472.674006] ata3: failed to resume link (SControl FFFFFFFF) [ 472.884011] ata4: failed to resume link (SControl FFFFFFFF) [ 473.724008] ata1: failed to resume link (SControl FFFFFFFF) [ 473.734002] ata2: failed to resume link (SControl FFFFFFFF) [ 473.744004] ata3: failed to resume link (SControl FFFFFFFF) [ 473.954010] ata4: failed to resume link (SControl FFFFFFFF) [ 474.794009] ata1: failed to resume link (SControl FFFFFFFF) [ 474.804002] ata2: failed to resume link (SControl FFFFFFFF) [ 474.814005] ata3: failed to resume link (SControl FFFFFFFF) [ 475.024008] ata4: failed to resume link (SControl FFFFFFFF) [ 475.864010] ata1: failed to resume link (SControl FFFFFFFF) [ 475.874002] ata2: failed to resume link (SControl FFFFFFFF) [ 475.884005] ata3: failed to resume link (SControl FFFFFFFF) [ 476.094018] ata4: failed to resume link (SControl FFFFFFFF) [ 476.934008] ata1: failed to resume link (SControl FFFFFFFF) [ 476.944002] ata2: failed to resume link (SControl FFFFFFFF) [ 476.954005] ata3: failed to resume link (SControl FFFFFFFF) [ 477.164009] ata4: failed to resume link (SControl FFFFFFFF) [ 478.004008] ata1: failed to resume link (SControl FFFFFFFF) [ 478.014002] ata2: failed to resume link (SControl FFFFFFFF) [ 478.024004] ata3: failed to resume link (SControl FFFFFFFF) [ 478.234011] ata4: failed to resume link (SControl FFFFFFFF) [ 479.074008] ata1: failed to resume link (SControl FFFFFFFF) [ 479.084003] ata2: failed to resume link (SControl FFFFFFFF) [ 479.094004] ata3: failed to resume link (SControl FFFFFFFF) [ 479.304010] ata4: failed to resume link (SControl FFFFFFFF) [ 480.144008] ata1: failed to resume link (SControl FFFFFFFF) [ 480.154002] ata2: failed to resume link (SControl FFFFFFFF) [ 480.164005] ata3: failed to resume link (SControl FFFFFFFF) [ 480.374011] ata4: failed to resume link (SControl FFFFFFFF) [ 481.214014] ata1: failed to resume link (SControl FFFFFFFF) [ 481.224003] ata2: failed to resume link (SControl FFFFFFFF) [ 481.234006] ata3: failed to resume link (SControl FFFFFFFF) [ 481.444010] ata4: failed to resume link (SControl FFFFFFFF) [ 482.284010] ata1: failed to resume link (SControl FFFFFFFF) [ 482.294002] ata2: failed to resume link (SControl FFFFFFFF) [ 482.304004] ata3: failed to resume link (SControl FFFFFFFF) [ 482.514008] ata4: failed to resume link (SControl FFFFFFFF) [ 483.354009] ata1: failed to resume link (SControl FFFFFFFF) [ 483.364002] ata2: failed to resume link (SControl FFFFFFFF) [ 483.374004] ata3: failed to resume link (SControl FFFFFFFF) [ 483.584010] ata4: failed to resume link (SControl FFFFFFFF) [ 484.424008] ata1: failed to resume link (SControl FFFFFFFF) [ 484.434002] ata2: failed to resume link (SControl FFFFFFFF) [ 484.444004] ata3: failed to resume link (SControl FFFFFFFF) [ 484.654009] ata4: failed to resume link (SControl FFFFFFFF) [ 485.494000] ata1: failed to resume link (SControl FFFFFFFF) [ 485.504002] ata2: failed to resume link (SControl FFFFFFFF) [ 485.514005] ata3: failed to resume link (SControl FFFFFFFF) [ 485.724009] ata4: failed to resume link (SControl FFFFFFFF) [ 486.564007] ata1: failed to resume link (SControl FFFFFFFF) [ 486.574003] ata2: failed to resume link (SControl FFFFFFFF) [ 486.584005] ata3: failed to resume link (SControl FFFFFFFF) [ 486.794003] ata4: failed to resume link (SControl FFFFFFFF) [ 487.634009] ata1: failed to resume link (SControl FFFFFFFF) [ 487.644002] ata2: failed to resume link (SControl FFFFFFFF) [ 487.654005] ata3: failed to resume link (SControl FFFFFFFF) [ 487.864010] ata4: failed to resume link (SControl FFFFFFFF) [ 488.704008] ata1: failed to resume link (SControl FFFFFFFF) [ 488.714002] ata2: failed to resume link (SControl FFFFFFFF) [ 488.724004] ata3: failed to resume link (SControl FFFFFFFF) [ 488.934010] ata4: failed to resume link (SControl FFFFFFFF) [ 489.774008] ata1: failed to resume link (SControl FFFFFFFF) [ 489.784002] ata2: failed to resume link (SControl FFFFFFFF) [ 489.794004] ata3: failed to resume link (SControl FFFFFFFF) [ 490.004010] ata4: failed to resume link (SControl FFFFFFFF) [ 490.844010] ata1: failed to resume link (SControl FFFFFFFF) [ 490.854003] ata2: failed to resume link (SControl FFFFFFFF) [ 490.864005] ata3: failed to resume link (SControl FFFFFFFF) [ 491.074008] ata4: failed to resume link (SControl FFFFFFFF) [ 491.914009] ata1: failed to resume link (SControl FFFFFFFF) [ 491.924003] ata2: failed to resume link (SControl FFFFFFFF) [ 491.934005] ata3: failed to resume link (SControl FFFFFFFF) [ 492.144009] ata4: failed to resume link (SControl FFFFFFFF) [ 492.984008] ata1: failed to resume link (SControl FFFFFFFF) [ 492.994002] ata2: failed to resume link (SControl FFFFFFFF) [ 493.004005] ata3: failed to resume link (SControl FFFFFFFF) [ 493.214010] ata4: failed to resume link (SControl FFFFFFFF) [ 494.054008] ata1: failed to resume link (SControl FFFFFFFF) [ 494.064003] ata2: failed to resume link (SControl FFFFFFFF) [ 494.074005] ata3: failed to resume link (SControl FFFFFFFF) [ 494.284010] ata4: failed to resume link (SControl FFFFFFFF) [ 495.124008] ata1: failed to resume link (SControl FFFFFFFF) [ 495.134002] ata2: failed to resume link (SControl FFFFFFFF) [ 495.144005] ata3: failed to resume link (SControl FFFFFFFF) [ 495.354010] ata4: failed to resume link (SControl FFFFFFFF) [ 496.194014] ata1: failed to resume link (SControl FFFFFFFF) [ 496.204003] ata2: failed to resume link (SControl FFFFFFFF) [ 496.214005] ata3: failed to resume link (SControl FFFFFFFF) [ 496.424020] ata4: failed to resume link (SControl FFFFFFFF) [ 497.264010] ata1: failed to resume link (SControl FFFFFFFF) [ 497.274002] ata2: failed to resume link (SControl FFFFFFFF) [ 497.284004] ata3: failed to resume link (SControl FFFFFFFF) [ 497.494009] ata4: failed to resume link (SControl FFFFFFFF) [ 498.334009] ata1: failed to resume link (SControl FFFFFFFF) [ 498.344002] ata2: failed to resume link (SControl FFFFFFFF) [ 498.354004] ata3: failed to resume link (SControl FFFFFFFF) [ 498.564008] ata4: failed to resume link (SControl FFFFFFFF) [ 499.404009] ata1: failed to resume link (SControl FFFFFFFF) [ 499.414002] ata2: failed to resume link (SControl FFFFFFFF) [ 499.424005] ata3: failed to resume link (SControl FFFFFFFF) [ 499.634011] ata4: failed to resume link (SControl FFFFFFFF) [ 500.474008] ata1: failed to resume link (SControl FFFFFFFF) [ 500.484009] ata2: failed to resume link (SControl FFFFFFFF) [ 500.494005] ata3: failed to resume link (SControl FFFFFFFF) [ 500.704011] ata4: failed to resume link (SControl FFFFFFFF) [ 501.544006] ata1: failed to resume link (SControl FFFFFFFF) [ 501.554002] ata2: failed to resume link (SControl FFFFFFFF) [ 501.564005] ata3: failed to resume link (SControl FFFFFFFF) [ 501.774010] ata4: failed to resume link (SControl FFFFFFFF) [ 502.614009] ata1: failed to resume link (SControl FFFFFFFF) [ 502.624003] ata2: failed to resume link (SControl FFFFFFFF) [ 502.634005] ata3: failed to resume link (SControl FFFFFFFF) [ 502.844010] ata4: failed to resume link (SControl FFFFFFFF) [ 503.684008] ata1: failed to resume link (SControl FFFFFFFF) [ 503.694003] ata2: failed to resume link (SControl FFFFFFFF) [ 503.704004] ata3: failed to resume link (SControl FFFFFFFF) [ 503.914010] ata4: failed to resume link (SControl FFFFFFFF) [ 504.754008] ata1: failed to resume link (SControl FFFFFFFF) [ 504.764002] ata2: failed to resume link (SControl FFFFFFFF) [ 504.774005] ata3: failed to resume link (SControl FFFFFFFF) [ 504.984008] ata4: failed to resume link (SControl FFFFFFFF) [ 505.824009] ata1: failed to resume link (SControl FFFFFFFF) [ 505.834002] ata2: failed to resume link (SControl FFFFFFFF) [ 505.844005] ata3: failed to resume link (SControl FFFFFFFF) [ 506.054010] ata4: failed to resume link (SControl FFFFFFFF) [ 506.894009] ata1: failed to resume link (SControl FFFFFFFF) [ 506.904003] ata2: failed to resume link (SControl FFFFFFFF) [ 506.914004] ata3: failed to resume link (SControl FFFFFFFF) [ 507.124011] ata4: failed to resume link (SControl FFFFFFFF) [ 507.964008] ata1: failed to resume link (SControl FFFFFFFF) [ 507.974003] ata2: failed to resume link (SControl FFFFFFFF) [ 507.984004] ata3: failed to resume link (SControl FFFFFFFF) [ 508.194009] ata4: failed to resume link (SControl FFFFFFFF) [ 509.034008] ata1: failed to resume link (SControl FFFFFFFF) [ 509.044002] ata2: failed to resume link (SControl FFFFFFFF) [ 509.054005] ata3: failed to resume link (SControl FFFFFFFF) [ 509.264010] ata4: failed to resume link (SControl FFFFFFFF) [ 510.104009] ata1: failed to resume link (SControl FFFFFFFF) [ 510.114002] ata2: failed to resume link (SControl FFFFFFFF) [ 510.124005] ata3: failed to resume link (SControl FFFFFFFF) [ 510.334010] ata4: failed to resume link (SControl FFFFFFFF) [ 511.174013] ata1: failed to resume link (SControl FFFFFFFF) [ 511.184003] ata2: failed to resume link (SControl FFFFFFFF) [ 511.194005] ata3: failed to resume link (SControl FFFFFFFF) [ 511.404010] ata4: failed to resume link (SControl FFFFFFFF) [ 512.244010] ata1: failed to resume link (SControl FFFFFFFF) [ 512.254003] ata2: failed to resume link (SControl FFFFFFFF) [ 512.264004] ata3: failed to resume link (SControl FFFFFFFF) [ 512.474010] ata4: failed to resume link (SControl FFFFFFFF) [ 513.314009] ata1: failed to resume link (SControl FFFFFFFF) [ 513.324002] ata2: failed to resume link (SControl FFFFFFFF) [ 513.334004] ata3: failed to resume link (SControl FFFFFFFF) [ 513.544010] ata4: failed to resume link (SControl FFFFFFFF) [ 514.384009] ata1: failed to resume link (SControl FFFFFFFF) [ 514.394002] ata2: failed to resume link (SControl FFFFFFFF) [ 514.404004] ata3: failed to resume link (SControl FFFFFFFF) [ 514.614010] ata4: failed to resume link (SControl FFFFFFFF) [ 515.454008] ata1: failed to resume link (SControl FFFFFFFF) [ 515.464002] ata2: failed to resume link (SControl FFFFFFFF) [ 515.474004] ata3: failed to resume link (SControl FFFFFFFF) [ 515.684010] ata4: failed to resume link (SControl FFFFFFFF) [ 516.524007] ata1: failed to resume link (SControl FFFFFFFF) [ 516.534003] ata2: failed to resume link (SControl FFFFFFFF) [ 516.544005] ata3: failed to resume link (SControl FFFFFFFF) [ 516.754010] ata4: failed to resume link (SControl FFFFFFFF) [ 517.594010] ata1: failed to resume link (SControl FFFFFFFF) [ 517.604002] ata2: failed to resume link (SControl FFFFFFFF) [ 517.614005] ata3: failed to resume link (SControl FFFFFFFF) [ 517.824010] ata4: failed to resume link (SControl FFFFFFFF) [ 518.664008] ata1: failed to resume link (SControl FFFFFFFF) [ 518.674003] ata2: failed to resume link (SControl FFFFFFFF) [ 518.684005] ata3: failed to resume link (SControl FFFFFFFF) [ 518.894010] ata4: failed to resume link (SControl FFFFFFFF) [ 519.734009] ata1: failed to resume link (SControl FFFFFFFF) [ 519.744002] ata2: failed to resume link (SControl FFFFFFFF) [ 519.754005] ata3: failed to resume link (SControl FFFFFFFF) [ 519.964010] ata4: failed to resume link (SControl FFFFFFFF) [ 520.804009] ata1: failed to resume link (SControl FFFFFFFF) [ 520.814002] ata2: failed to resume link (SControl FFFFFFFF) [ 520.824005] ata3: failed to resume link (SControl FFFFFFFF) [ 521.034010] ata4: failed to resume link (SControl FFFFFFFF) [ 521.874009] ata1: failed to resume link (SControl FFFFFFFF)